Alinco DJ-A11E - Manual (Page 24)

Professional
FM Transceiver
7
NOTE: Do not use third-party antenna as it may radiate more
RF that exceeds SAR limit guidances.
PREPARATION
Installing / Removing the Battery
Match the three grooves of the battery pack with the 1.
corresponding guides on the back of the transceiver,
and then push it.
Press the battery pack until the release latch on the 2.
top of the transceiver locks. After hearing a “click”
sounds, the battery has been locked.
To remove the battery pack, slide up the release latch 3.
and remove the pack away from the transceiver.
Installing / Removing the Antenna
Installing the Antenna
1. Hold the antenna by its base.
2. Align the grooves at the base of the antenna with the
protrusions on the antenna connector.
3. Slide the antenna down and turn it clockwise until it stops.
4. Confirm that the antenna is securely connected.Check
and secure the connection from time to time.
Removing the Antenna:
Turn the antenna counter-clockwise to disconnect the antenna.