Alinco DJ-A11E - Manual (Page 25)

Professional
FM Transceiver 8
PREPARATION
Installing / Removing the Belt Clip
■ Installing the Belt Clip:
1. Put the belt clip on the back of the unit, and the screw
clockwise until it stops.
2. Confirm that the belt clip is securely attached.
* Tighten up the screw occasionally.
■ Removing the Belt Clip:
Turn the screw counter-clockwise to remove the belt clip.
Caution: Use the screws of specified size only. Others
may cause damage to the product. (screws size PM
Φ 2.5mm x 3mm)
Accessories
Remove the jack cover and insert the accessory plug
into the jack,as shown.
When the accessory is not used, please be sure to
put on cover with 3x6mm screw securely.
Note:
1.To keep the radio dust and splash resistant, the cover must
be closed properly with the original supplied cover.
2.The radio is not dust and splash resistant while using the
optional accessory risking that the water may penetrate
inside through the plug.