Alinco DJ-A11E - Manual (Page 31)

Professional
FM Transceiver 14
BASIC OPERATIONS
Group Selection
By PC-preprogramming, 128 channels can be assigned in total which are divided into 8 groups
with 16 channels in each group. If different groups are being programmed, press and hold [PF2] to
turn on. Still holding [PF2] for another 2 seconds, it will announce the current group number. Turn
the selector knob to choose the desired group. The voice announce will tell you the selected group
number.
NOTE: You can enable or disable the group selection function by programming software.
Receiving
NOTE: If your transceiver has set higher squelch level or being programmed with signaling features, it
may fail to hear the calling.
Transmitting
Press and release the [PF2] key to monitor for a while to confirm the channel desired is not busy.
Press and hold [PTT] key to speak into microphone (MIC). Keep the distance of about 2.5~5cm
between your lips and MIC, and speak at normal voice level.
When the channel you are operating is called, LED GREEN lights, then you hear the voice from
transmitting party.
NOTE: Press [PTT] key, red is lit indicating it is transmitting. Release PTT to receive.