Alinco DJ-A11E - Manual (Page 39)

Professional
FM Transceiver 22
PRESET OPERATIONS
CTCSS / DCS Encode / Decode
It enables the CTCSS/DCS encode/decode setting.Pre-programming is necessary and usually not
recommended for general users.
Optional Signaling
Users can enable or disable the Optional Signaling in every channel by programming software. This
Signaling function is similar to CTCSS/DCS which embodies functions as Selective Call, Group Call,
All Call, PTT ID, and Remotely stun and Waken.
PTT ID: 1. If current channel is edited with PTT ID, the transceiver will send transmitting ID when pressing
or releasing PTT key.
You can set group call wildcard for each group 2. by programming software. (DTMF character A. B.C.D.***
or “#”).
The caller can call different groups by sending different group call codes.When the receiving party
receives a valid ID code, one or all of the characters would be replaced by wildcard characters
and the receiving part can realize all call, group call or selective call. It is much easy and flexible to
realize all call, group call and etc by using group call code.
For example:
Group code –"C"
Radio A Radio B Radio C Radio D
ID code of the receiving party is 123 223 235 355.
If the calling party uses " C23" to call, Radio A and Radio B will receive the call.
If the calling party uses" CC5" to call, Radio C and Radio D will receive the call.
If the calling party uses " CCC" to call, All Radios would receive the call..
Following features can be set by using dealer-programming software.