All Power AP-SB055E - Manual (Page 18)

ENGINE SPECIFICATIONS
DISPLACEMENT 196 cc
ROTATE SPEED 4000RPM
BORE 68mm
STROKE 45mm
GASOLINE (CAPACITY) 1.5L
OIL CAPACITY 0.6L(5W30)
SPARK PLUG F7RTC
VALVE CLEARANCE Intake: 0.1~0.15 mm
Exhaust: 0.15~0.2 mm
NOISE(≤7m) 65 dbA
DIMENSION(LXWXH) 312×362×335
DRY WEIGHT 15kg
SNOW THROWER ENGINE LUBRICATION
Check the crankcase oil level before starting the engine and after each eight (8) hours of continuous use. See
Figure 16. Add S.A.E. 5W30 motor oil as needed. Synthetic 5W30 is acceptable for all temperatures. Tighten
fill cap/dipstick securely each time you check the oil level.
Change the oil every fifty (50) hours or at least once a year if the snow thrower is not used for fifty (50) hours.
TO CHANGE ENGINE OIL
1. Position the snow thrower so that the
oil drain plug is at the lowest point on the engine.
2. When the engine is warm, remove the oil drain plug (see Figure 17) and the oil fill cap/dipstick (see
Figure 16). Drain the oil into a suitable container.
3. After draining all the oil, reinstall the oil drain plug securely.
4. Fill the engine crankcase with the recommended motor oil, pouring slowly.
DO NOT OVERFILL. See “To
Add Oil” in the Operation Section.
Figure 17
TO ADJUST OR REPLACE THE SPARK PLUG
Check the
spark plug every 25 hours. Replace the spark plug if the electrodes are pitted or burned, if the
porcelain is cracked, or every 100 hours of use. The spark plug is housed in the engine compartment under the
top cover and cannot be seen under normal conditions.
17