Allmand Nite-Lite Pro Vertical Tower V Series - Manual (Page 18)

18 18
SPECIFICATIONS
TRAILER
The engine-generator set is housed in a fully bunded two wheel trailer fabricated from
heavy gauge steel. The design enables the trailer to contain the outriggers in a simple,
compact position.
MAST
When the mast is in the operating position it is located in the middle of a three point
outrigger system for optimum balance and stability.
The mast consists of seven fabricated steel sections that telescope to 25 ft and self-
lubricating UHMW plastic guide pads to provide smooth operation and reduced friction.
The mast sections are extended with an electric winch. The winch design includes limit
switches that turn the winch off when the mast reaches full extension or is fully retract-
ed.
STABILIZERS
The three point outrigger design consists of two retractable side outriggers and a tongue
jack.
FLOOD LIGHT ASSEMBLY
The flood light assembly consists of four 1000 watt lamp fixtures sealed for all weather
use. SHO 1000 fixture - BT - 37 lamp, Metal Halide
Laboratory rated life is 10,000 hours.
 Lumen rating: 110,000
 Warm up time: 2-4 minutes
 Restart time: 10-15 minutes
TOWING INSTRUCTIONS
Before towing the Night-Lite Pro the trailer should be inspected visually to insure that the
following operations have been completed:
1. Hitch is securely attached to the towing vehicle
2. All outriggers and jacks are retracted and secured.
3. Light fixtures are positioned for transport.
4. Doors are closed and secure.
5. Check for adequate tire pressure.
6. Tail lights are connected and operational.
7. Ground rod is removed from ground and secured in trailer.