Starting instructions – Allmand Nite-Lite Pro Vertical Tower V Series User Manual

Page 20

Advertising
background image

20

20

TRAILER SERIAL NUMBER LOCATION

STARTING INSTRUCTIONS

FOR A WARM ENGINE (Kubota engines)

 Follow the same procedure as described for cold weather starting, skipping step 2.

Use of the glow plugs is not recommended when engine is warm.

LOW OIL PRESSURE SHUT-OFF SYSTEM

Should a low oil pressure condition occur, the control module breaks the circuit between
the battery and the fuel solenoid, allowing the spring load to immediately move the fuel
control to the shut-off position.

HIGH COOLANT TEMPERATURE SHUT-OFF SYSTEM

Should a high coolant temperature condition occur, the control module breaks the circuit
between the battery and the fuel solenoid, allowing the spring load to immediately move
the fuel control to the shut-off position.

STOPPING THE ENGINE

To stop the engine turn the on-off switch to the off position, this breaks the circuit
between the battery and the fuel solenoid, allowing the spring load to immediately
move the fuel control to the shut-off position

SERIAL NUMBER LOCATION

Trailer: All NIGHT-LITE PRO series trailers have a serial number plate attached to the
rear tower support below the tower lock. (See illustration)

Advertising