Allmand Brothers TLB6235 Tractor - Manual (Page 11)

11
Before changing seats to operate the backhoe:
Engage park brake.
Lower loader bucket to the ground.
After changing positions to the rear backhoe
seat:
Lower stabilizers to the ground.
Lift rear tires off the ground so as to remove the
weight from the tires.
Otherwise, from the loader operator seat:
Raise loader bucket and stabilizers
Drive machine forward to change position
Properly secure machine after each move.
DO NOT dig under stabilizers!
Stabilizers must be set on firm surfaces. Be alert
to possible machine movement when raising
stabilizers and loader bucket.
Avoid swinging bucket to the downhill side of the
machine when digging on a slope.
Dump soil on the uphill side. If not, the machine
has a possibility for rollover.
Move boom slowly when raising loaded bucket
to full height.
Clear all persons from area of operation and
machine movement.
HANDLE CHEMICAL PRODUCTS SAFELY
Direct exposure to hazardous chemicals can
cause serious injury. Potentially hazardous
chemicals used with TLB 535 equipment include
such items as lubricants, coolants, paints and
adhesives.
A Material Safety Data Sheet (MSDS) provides
specific details on chemical products, physical
and/or health hazards, safety procedures and
emergency response techniques.
Check the MSDS before you start any job using
a hazardous chemical.
Follow recommended procedures and only use
recommended and approved equipment.