ARAG BRAVO 300S - Multi-row crop sprayers, Direct connection / RCU Installation - Software ver - Manual (Page 11)

11
6.3 Bracket fixing
The monitor must be mounted after having fixed the bracket at the desired location (the previous
paragraph shows the bracket drilling template).
The bracket must be slid out of the monitor seat (
a , Fig. 5) and fixed using the supplied screws ( b ).
Make sure the bracket is securely mounted, fit the monitor on it, and push it until it locks in place ( c ).
6.4 Control unit (RCU) fixing
Respect the mounting direction of the control unit, as specified in Fig. 6 (connectors shall be facing
down).
No other type of assembly is allowed.
Fig. 4c
Fig. 5
Fig. 6