ARAG BRAVO 300S - Multi-row crop sprayers, Direct connection / RCU Installation - Software ver - Manual (Page 12)

12
6.5 Control unit position
The control unit must be fixed with the special brackets supplied and fitted to the unit, positioning it
as shown in the manual provided with the assembly.
MAKE SURE TO FOLLOW ALL THE SAFETY INSTRUCTIONS GIVEN IN THE CON-
TROL UNIT’S MANUAL.
6.6 Hydraulic unit positioning
The hydraulic unit shall be secured to the machine, making sure it is well protected against the
elements and the fluid sprayed by the machine.
ARAG IS NOT LIABLE FOR ANY DAMAGE RESULTING FROM THE INSTALLATION BY
UNSKILLED PERSONNEL. ANY SYSTEM DAMAGE CAUSED BY A WRONG INSTALLATION
AND/OR CONNECTION AUTOMATICALLY VOIDS THE WARRANTY.
CAUTION! DO NOT CONNECT HYDRAULIC UNITS OTHER THAN THE SPECIFIED ONES
(SEE ARAG GENERAL CATALOGUE). ARAG IS NOT LIABLE FOR ANY DAMAGE TO THE
PRODUCT, MALFUNCTION ERRORS AND ANY KIND OF RISK IF THE MODULE IS CON-
NECTED TO NON ORIGINAL UNITS OR UNITS NOT SUPPLIED BY ARAG.
7 coMputer connection to the farMing Machine
7.1 General precautions for a correct harness position
• Securing the cables:
- secure the harness so that it does not interfere with moving parts;
- route the harnesses in such a way that they cannot come into contact with moving parts.
• Routing the cables to protect against water infiltrations:
- the cable branches must ALWAYS be face downwards (Fig. 7a and 8a).
DIRECT CONNECTION
Fig. 7a Fig. 7b
SYSTEM WITH RCU
Fig. 8a Fig. 8b
CONTINueS