ARAG BRAVO 300S - Multi-row crop sprayers, Direct connection / RCU Installation - Software ver - Manual (Page 19)

19
9 Maintenance / diagnostics / repairs
- Clean only with a soft wet cloth.
- DO NOT use aggressive detergents or products.
- DO NOT clean equipment with direct water jets.
9.1 Troubleshooting
The complete version of the troubleshooting section is available on the complete
manual, in the CD supplied with the product.
fault cause reMedy
The display does not switch on
No power supply • Check power supply connection (Par. 7.2).
Computer is OFF • Press the ON key.
Valve controls take no effect Valves not connected • Connect the connectors (Par. 8.2).
One valve does not open No power supply to valve • Check valve electric connection and operation.
Tab. 5
9.2 Computer technical data
Description BRAVO 300S
Display Graphic LCD, 240 x 73 pixels, white back-lighting
Power supply 11 ÷ 14 Vdc
Consumption (valves excluded) 450 mA
Working temperature
0°C ÷ 60 °C
+32°F ÷ +140 °F
Digital inputs for open collector sensors: max. 2000 imp./sec.
Analog input 4 ÷ 20 mA
Protection against polarity inversion •
Protection against short-circuit •
Weight
1108 g (Bravo with direct connection without harness)
1376 g (Bravo with RCU without harness)
Tab. 6
Fig. 17