ARM Electronics JHD - Manual (Page 10)

JPEG2000 Stand alone DVR User Guide
- 10 -
2-1 Camera and monitor installation
2-1-1 Camera installation
Connect camera to DVR camera in CH1~CH16
※Please do not start the DVR before the camera.
installation is done.
2-1-2 Monitor and SPOT installation
Monitor: Connect the MONTIOR port on the DVR back panel to the “video in” port on the monitor.
SPOT: second monitor output. Once alarm or motion is triggered, it will pop up automatically or display in sequence
according to the set up.
2-1-3 Loop out installation
To monitor a single channel, connect the “loop out” of
the corresponding channel to a monitor.
To record a specific channel individually, connect the
“loop out” of the corresponding channel to a DVR,
VCR, or other record device.
CHAP.2 Installation