ARM Electronics Casino VCR800 - Manual (Page 17)

ALARM RECORDING
English-17
It is possible to switch from all recording modes to linear recording mode by applying an
alarm signal to the SET terminal on the rear panel.
* Set the alarm recording mode and alarm recording period with alarm set up of menu.
* The index signal is automatically recorded when an alarm recording begins.
Buzzer is activated while alarm recording when the alarm signal is input, if the buzzer is set
ON on the picture of WARNING / BUZZER.
* In case when another alarm signal is input into ALARM IN TERMINAL while the index
signal is recorded,
-Input within 30 sec. : Recording is newly started without indicating alarm listing any more.
-Input after 30 sec. : Recording is newly started with new starting time indicated on the
alarm listing.
* When an alarm signal is input during alarm video tape recording it is executed based on the
last input alarm signal.
* It is possible to switch the alarm
recording by applying the set
signal from the alarm sensor
during recording in all time
mode.
ALARM RECORDING CONNECTION
* The alarm can be confirmed
from a distance. Because buzzer
sounds when external alarm
signal is input.