Eneo HDD-2030PTZ1080 - Manual (Page 30)

• ORIGIN OFFSET
OFFSET SETUP
(CTRL KEY)
PAN OFFSET : 000.0
TILT OFFSET : 000.0
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
This feature is useful to align a new dome camera exactly the same as the previously installed
dome camera.
Dome camera’s origin set and all data initialize option do not override offset values. Only the
default set option in this menu will set the offset value to zero. This can be used to avoid ceiling
obstructions.
• FACTORY DEFAULT
Select “FACTORY DEFAULT” to initialize the data.
FACTORY DEFAULT
ARE YOU SURE ?
CANCEL
OK
• DOME RESET
DOME RESET
ARE YOU SURE ?
CANCEL
OK
This feature is used to re-calibrate the orientation of a selected dome camera. Origin offset value
is not affected by this function. (Offset is still valid after origin set.)
25