Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output User Manual
Page 13
TM
BrightEye 90-F
BrightEye 90-F - Page 13
VU
VU output level and the status of the Gain adjustment for each of these
channel pairs is indicated by the state the VU and Gain indicators for each
of the channel pairs. The VU indicator illuminates red when the audio level
exceeds the headroom level set by the user (using the Peak Indicator control
in BrightEye PC or Mac). The indicator illuminates green when the gain
for a given audio channel pair is set to unity, red when set to other
than unity, or yellow when gain exceeds 0 VU (-20dBFS).
Mon Vol (Monitor Volume)
Illuminates green when monitor volume is set to unity, or red when set to
other than unity.
Input
Indicates the type of video signal detected on the
HD/SD SDI/Cpst In
video input BNC. Choices are
HD or SD/Composite. Ref (Reference)
illuminates when a valid reference is detected on the
Ref In BNC.
Output
Indicates the type of video signal selected on the
HD/SD SDI Out BNC.
Choices are
1080i, 720p, 1080p, 1080sF or SD.
Laser
Illuminates green when an optical signal is detected on the
HD/SD SDI
Optical Out.
Mode
Indicates the output aspect ratio when upconverting the input signal.
Choices are:
• Anamorphic – original material is stretched as needed to 16:9.
•
Box – Letter Box or Pillar Box is applied to the original material.
•
Crop – top and bottom edges, or left and right edges are cropped off the
original material.
•
Manual – Illuminates green when the output aspect ratio has been set
manually.
Bars
Illuminates green when color bars are selected as the output signal.
Graticule
Illuminates green when the on-screen aspect ratio graticule is displayed.
Gain
Illuminates green when video gain is set to unity, or red when set to other
than unity.
Pwr (Power)
Illuminates green when power is applied to the unit and the internal
voltage regulator is functioning correctly.