Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output - Manual (Page 3)

TM
BrightEye 90-F
BrightEye 90-F - Page 3
The HDMI output provides confidence monitoring of the same signal that is on
the two SDI outputs. When SD SDI is present on the SDI outputs, composite
video will be present on the composite output BNC.
BrightEye 90-F is powered by a 12 volt DC universal power supply. This power
supply can accept an input voltage between 90 and 230 volts, at 50 or 60 Hertz.
It uses a standard IEC line cord and can be used anywhere in the world. It is
normal for the converter to be quite warm to the touch when operating.
For your reference, see the functional block diagram of the BrightEye 90-F on
this page and the next page. The diagram appears twice, first in a portrait view,
then larger as a landscape view.
Composite or Tri-Level
Ref In
Genlock
Up/Down/Cross
Conversion
Audio Mux
HD/SD SDI/Composite
Video In
AES Digital Audio
Inputs/Outputs
Analog
Decoder
Auto-Selecting
AES Transmitters
AES Receivers
SDI
Receiver
Audio
Demux
Ch 1/2
Composite
Out
Ch 3/4
Ch 5/6
Ch 7/8
Audio
Processing
SDI Driver
Composite
Encoder
(SD Only)
Laser Fiber
Driver
HD/SD SDI Out
HD/SD SDI
Optical Out
HDMI Out
Headphone
Jack
Tie Back
To AES I/O
Ports
HDMI
Xmtr
Monitor
Amp
Audio I/O selectable as:
Mux 8 = 8 inputs or
Mux 4 = 4 in/4 out or
Demux = 8 outputs
Provides embedded pass through of all 16 audio channels
BrightEye 90-F Functional Block Diagram, portrait view