Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output - Manual (Page 30)

BrightEye 90-F HD Up/Down/Cross Converter And ARC With AES Audio And Optical Output
BrightEye 90-F - Page 30
HD Standards Supported
1080i 50,59.94 or 60 Hz SMPTE 274M -4,5,6
720p 50,59.94 or 60 Hz SMPTE 296M -1,2,3
1080p 23.98,24 or 25 Hz SMPTE 274M -9,10,11
1080sF 23.98,24 or 25 Hz RP211 -14,15,16
Embedded Output (In Serial Output)
Group Assign Two of four groups
Channels Sixteen passed
Bit Depth 24 Bit
AES/EBU Digital Inputs
Number
Four (total of eight channels, selectable as inputs or outputs)
Type AES3id
Connector Coaxial, 75 Ω
Bit Depth 20 and 24 Bit
Sample Rate 30 KHz to 96 KHz (Sample Rate Converted internally to 48 KHz)
Reference Level -18 or -20 dBFS (selectable)
AES/EBU Digital Outputs
Number
Four (total of eight channels, selectable as inputs or outputs)
Type AES3id
Connector Coaxial, 75 Ω
Bit Depth 24 Bit
Sample Rate 48 KHz Synchronous to video output
Reference Level -18 or -20 dBFS (selectable)
Optical Output
Number One
Type HD Serial Digital 1.485 Gb/s SMPTE 274M, 292M, 296M, 297M or
SD Serial Digital 270Mb/s SMPTE 259M, 297M
Wavelength 1310 nm (non-CWDM)
(1550 non-CWDM by special order)
Power -7 dBm
Max Cable Length 20 km (For greater distances, or higher power and larger loss
budgets, please contact the factory)
Fiber Type Single Mode,
Multi-mode compatible with 8 dB attenuation at transmit end
Connector SC
Monitor Output
Number One
Connector HDMI
Type Follows SDI out
Audio Monitoring Output
Number One (for monitoring a pair of audio channels)
Connector 3.5mm stereo mini jack