Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output - Manual (Page 23)

TM
BrightEye 90-F
BrightEye 90-F - Page 23
Aud Input
The appearance of this menu will depend on the mode selected and the type of
audio used.
Multiplexer Mode
When the module is set for Mux 8, the Input menu provides the controls
shown below:
• Group A Status – the status of the audio selected in
Group A Select will be displayed as No Audio Present,
Group 1 OK, Group 2 OK, Group 3 OK, or Group 4 OK.
• Group B Status – the status of the audio selected in
Group B Select will be displayed as Off, No Audio Present,
Group 1 OK, Group 2 OK, Group 3 OK, or Group 4 OK.
• Group A Select – select the audio group to multiplex from Group 1,
Group 2, Group 3, Group 4.
• Group B Select – select the audio group to multiplex from Group 1,
Group 2, Group 3, Group 4, or Off.
• AES 1/2, 3/4, 5/6, 7/8 Status – for Mux 8 mode, the AES inputs will
report the audio type being input to the AES BNCs as No Input,
Sync Audio, Async Audio, Sync Data, or Async Data.
When the module is set for Mux 4, the Input menu provides the controls
shown below:
• Group A Status – the status of the audio selected in
Group A Select will be displayed as No Audio Present,
Group 1 OK, Group 2 OK, Group 3 OK, or Group 4 OK.
• Group A Select – select the audio group to multiplex from Group 1,
Group 2, Group 3, Group 4.
• AES 1/2, 3/4 Status – for Mux 4 mode, the AES inputs will report the
audio type being input to the AES BNCs as No Input, Sync Audio,
Async Audio, Sync Data, or Async Data.
• AES 5/6, 7/8 Status – for Mux 4 mode, the AES inputs will report the
AES audio status as being in Output Mode.