H3C Technologies H3C S10500 Series Switches - Manual (Page 3)

2
# Display device information. (The output may vary with switches.)
<Sysname> display device
Slot No. Brd Type Brd Status Subslot Num Sft Ver Patch Ver
0 LSU1SUPA Master 0 S10500-1126 P001
1 LSU1SUPA Slave 0 S10500-1126 P001
2 LSU1GP24TXSE Normal 0 S10500-1126 P001
3 LSU1GP24TXSE Normal 0 S10500-1126 P001
4 LSU1GP48EB Normal 0 S10500-1126 P001
5 LSU1GP48EB Normal 0 S10500-1126 P001
6 LSU1FAB04A Normal 0 S10500-1126 P001
7 NONE Absent 0 NONE None
8 NONE Absent 0 NONE None
9 NONE Absent 0 NONE None
The output shows that the switch has two MPUs, an active MPU in slot 0 and a standby MPU in slot 1.
# Check the free storage space on the active MPU.
<Sysname> dir /all
Directory of flash:/
0 -rw- 32923732 Aug 23 2011 17:21:35 main.bin
1 -rw- 151 Jun 02 2011 16:50:44 system.xml
2 -rw- 6625 Jun 02 2011 16:50:51 startup.cfg
3 drw- - Apr 28 2011 09:12:00 seclog
4 -rw- 29880628 Aug 11 2011 11:04:20 backup.bin
125349 KB total (62537 KB free)
If the free storage space is not enough for storing the patch package, delete undesired files with the
delete/unreserved command to release storage space.
# Check the free storage space on the standby MPU.
<Sysname> dir slot1#flash:/
Directory of slot1#flash:/
0 -rw- 32923732 Aug 23 2011 17:21:35 main.bin
1 -rw- 151 Jun 02 2011 16:50:44 system.xml
2 -rw- 6625 Jun 02 2011 16:50:51 startup.cfg
3 drw- - Apr 28 2011 09:12:00 seclog
4 -rw- 29880628 Aug 11 2011 11:04:20 backup.bin
125349 KB total (62537 KB free)
If the free storage space is not enough for storing the patch package, delete undesired files with the
delete/unreserved command to release storage space.
NOTE:
•
The delete /unreserved file-url command deletes a file permanently and the action cannot be undone.
• The delete file-url command moves a file to the recycle bin and the file still occupies storage space. To
permanently delete the file from the recycle bin, execute the reset recycle-bin command in the original
directory of the file.
NOTE:
In IRF mode, you need to check the free storage space on the active MPU and all standby MPUs to ensure
each MPU has enough space to store the patch package.