H3C Technologies H3C S7500E Series Switches User Manual
Page 154
5-9
LAN IIHs; and the Level-2 routers use the Level-2 LAN IIHs. The P2P IIHs are used on point-to-point
networks.
illustrates the hello packet format in broadcast networks, where the blue fields are the
common header.
Figure 5-7 L1/L2 LAN IIH format
z
Reserved/Circuit Type: The first 6 bits are reserved with a value of 0. The last 2 bits indicate the
router type. 00 means reserved, 01 indicates L1, 10 indicates L2, and 11 indicates L1/2.
z
Source ID: System ID of the router advertising the hello packet.
z
Holding Time: If no hello packets are received from the neighbor within the holding time, the
neighbor is considered down.
z
PDU Length: Total length of the PDU in bytes.
z
Priority: DIS priority.
z
LAN ID: Includes the system ID and a one-byte pseudonode ID.
shows the hello packet format on the point-to-point networks.