H3C Technologies H3C SecCenter IPS Manager - Manual (Page 11)

5
System management
The system management component of the IPS Manager is mainly used to configure IPS devices to be
managed by the H3C SecCenter.
To access the system management component, select the System Management tab. Then, you can
perform the following tasks:
• Device management
• Operator management
• System configuration
• License management (see " Registering the IPS Manager ")
Device management
Managing device groups
The device group management function allows you to add, modify, and delete device groups. When you
add devices later, you can add devices to device groups so that you can manage and collect statistics on
users, devices, and IP addresses by device group.
Configuration guide
From the navigation tree of the system management component, select Device Group List under Device
Management. The device group management page appears, as shown in Figure 5 . Table 1 describes
the device group management functions.
Figure 5 Device group management page
Table 1 Device group management functions
Function Description
Device group list
Allows you to view details about device groups, and modify and delete device
groups.
Adding a device group
Allows you to add a device group and configure the device group name and
description.
Device group list
From the navigation tree of the system management component, select Device Group List under Device
Management. The device group management page appears, displaying details about all device groups,
as shown in Figure 5 . Table 2 describes the fields of the device group list.