H3C Technologies H3C SecCenter IPS Manager - Manual (Page 15)

9
Item Description
Telnet Password
Optional
Specify the password for telneting to the device.
IMPORTANT:
The strength of the password must meet the password strength
requirements of the device.
SNMP Version
Required
Select an SNMP version from the dropdown list. The options include
SNMPv1, SNMPv2C, and SNMPv3.
Community String for Reading
Required when the SNMP version is SNMPv1 or SNMPv2C.
Specify the SNMP read community string to be used for communication
with the device.
The string can comprise up to 20 characters.
Community String for Writing
Required when the SNMP version is SNMPv1 or SNMPv2C.
Specify the SNMP write community string to be used for communication
with the device.
The string can comprise up to 20 characters.
Authentication Username
Required when SNMP version is SNMPv3.
Type the username for authentication.
Authentication Protocol
Required when SNMP version is SNMPv3.
Select a protocol for authentication.
Return to Template management functions .
Managing devices
On the device list, you can add and remove IPS devices, and perform operations to the devices, such as
telnet, login and properties modification.
Configuration guide
From the navigation tree, select Device List under Device Management. The device management page
appears, as shown in Figure 9 . All devices are displayed on the list. Table 7 describes the device
management functions provided on the device management page.
Figure 9 Device management page