H3C Technologies H3C SecCenter IPS Manager - Manual (Page 18)

12
Item Description
Device Group
Required
Select a device group for the device. By default, the device group named
default is selected.
Time Calibration
Required
Specify the time zone.
Select access template
Specify access parameters
Required. Select either of them.
• If you select Select access template, select a template from the
dropdown list. By default, the template named default is selected.
• If you select Specify access parameters, specify the access parameters.
Web Username
Required
Specify the username for managing the device through web.
The username can comprise up to 20 characters and must not contain
illegal characters.
Web Password
Required
Specify the password for managing the device through web.
IMPORTANT:
The strength of the password must meet the password strength
requirements of the device.
Web Port
Required
Specify the port of the device that provides web access service.
The port number must be an integer in the range from 1 to 65534.
Telnet Username
Optional
Specify the username for telneting to the device.
The username can comprise up to 20 characters and must not contain
illegal characters.
Telnet Password
Optional
Specify the password for telneting to the device.
IMPORTANT:
The strength of the password must meet the password strength
requirements of the device.
SNMP Version
Required
Select a version, which can be SNMPv1, SNMPv2C, or SNMPv3.
Community String For Reading
Required when the SNMP version is SNMPv1 or SNMPv2C.
Specify the SNMP read community string to be used for communication
with the device.
The string can comprise up to 20 characters.
Community String For Writing
Required when the SNMP version is SNMPv1 or SNMPv2C.
Specify the SNMP write community string to be used for communication
with the device.
The string can comprise up to 20 characters.