H3C Technologies H3C SecBlade LB Cards User Manual
H3c lb products, System management configuration guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Title Page
- Preface
- Contents
- Overview
- Login overview
- Logging in to the CLI
- Logging in to the Web interface
- Logging in through SNMP
- Logging in to the LB module from the network device
- Logging in to the LB module from the network device
- Monitoring and managing the LB module on the network device
- Example of monitoring and managing the LB module from the network device
- Displaying device information
- Managing the device
- Configuring the device name
- Changing the system time
- Setting the Web idle timeout timer
- Enabling displaying the copyright statement
- Configuring banners
- Configuring the maximum number of concurrent users
- Configuring the exception handling method
- Rebooting the device
- Scheduling jobs
- Configuring temperature thresholds for a device
- Clearing unused 16-bit interface indexes
- Verifying and diagnosing transceiver modules
- Displaying and maintaining device management
- Configuring local users
- Controlling user logins
- Configuring VDs
- Configuring unified multisystem management
- Configuring NTP
- Overview
- Configuring NTP in the Web interface
- Configuring NTP at the CLI
- NTP configuration task list
- Configuring NTP operation modes
- Configuring the local clock as a reference source
- Configuring optional parameters for NTP
- Configuring access-control rights
- Configuring NTP authentication
- Displaying and maintaining NTP
- NTP client/server mode configuration example
- NTP symmetric peers mode configuration example
- NTP broadcast mode configuration example
- NTP multicast mode configuration example
- Configuration example for NTP client/server mode with authentication
- Configuration example for NTP broadcast mode with authentication
- Configuration guidelines
- Upgrading software
- Hardware compatibility
- Overview
- Software upgrade methods
- Upgrading BootWare
- Upgrading the system software
- Installing hotfixes
- Displaying and maintaining software upgrade
- Software upgrade examples
- Dealing with password loss
- Disabling password recovery capability
- Examining the state of password recovery capability
- Dealing with console login password loss when password recovery capability is enabled
- Dealing with user privilege level password loss when password recovery capability is enabled
- Dealing with password loss when password recovery capability is disabled
- Managing configuration files
- Hardware compatibility
- Overview
- Managing configuration files in the Web interface
- Managing configuration files at the CLI
- Saving the running configuration
- Configuring configuration rollback
- Specifying the next-startup configuration file
- Backing up the next-startup configuration file to a TFTP server
- Restoring the next-startup configuration file from a TFTP server
- Deleting the next-startup configuration file
- Displaying and maintaining a configuration file
- Using the CLI
- Command conventions
- Using the undo form of a command
- CLI views
- Accessing the CLI online help
- Entering a command
- Understanding command-line error messages
- Using the command history function
- Controlling the CLI output
- Configuring command levels
- Saving the running configuration
- Displaying and maintaining CLI
- Index