H3C Technologies H3C SecBlade LB Cards - Manual (Page 110)

100
3. Assign interfaces to the VDs:
a. Select System > Device Management > Virtual Device > Interface from the navigation tree.
b. Select VD_A for GigabitEthernet 0/1, and select VD_B for GigabitEthernet 0/2.
c. Click Apply.
Figure 66 Assigning interfaces to VD_A and VD_B
4. Assign VLANs to VD_A:
a. Select System > Device Management > Virtual Device > VLAN from the navigation tree.
b. Click the icon for VD_A, and enter VLAN ranges 100-205, 300-310.
c. Click Apply.
Figure 67 Assigning VLANs to VD_A
5. Assign VLANs to VD_B:
a. Select System > Device Management > Virtual Device > VLAN from the navigation tree.
b. Click the icon for VD_B, and enter VLAN ranges 50-80,400,500-530.
c. Click Apply.
Figure 68 Assigning VLANs to VD_B