H3C Technologies H3C SecBlade LB Cards - Manual (Page 161)

151
Figure 97 Network diagram
Configuration procedure
1. Configure the FTP server (the configuration varies with server vendors):
# Set the access parameters for the FTP client (including enabling the FTP server function, setting
the FTP username to aaa and password to hello, and assign the FTP user the right to access the
flash0:/aaa directory).
<FTP-Server> system-view
[FTP-Server] ftp server enable
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash0:/aaa
2. Configure the LB product:
# Log in to the FTP server.
<LB> ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
# Download new-config.cfg from the FTP server.
[ftp] ascii
[ftp] get new-config.cfg
# Download soft-version2.bin from the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
<LB>
# Specify new-config.cfg as the next-startup configuration file.
<LB> startup saved-configuration new-config.cfg
FTP Client
FTP Server
User
Telnet
LB
1.1.1.1/24
2.2.2.2/24
Internet