Configuring the system time at the cli, Configuration guidelines – H3C Technologies H3C SecBlade LB Cards User Manual

Page 71

Advertising
background image

61

Item Description

Adjust clock for
daylight saving time

changes

Adjust the system clock for daylight saving time changes, which means adding one
hour to the current system time.
Click Adjust clock for daylight saving time changes to expand the option, as shown
in

Figure 44

. You can configure the daylight saving time changes in the following

ways:

Specify that the daylight saving time starts on a specific date and ends on a specific

date. The time range must be greater than one day and smaller than one year. For

example, configure the daylight saving time to start on August 1st, 2006 at

06:00:00 a.m., and end on September 1st, 2006 at 06:00:00 a.m.

Specify that the daylight saving time starts and ends on the corresponding specified

days every year. The time range must be greater than one day and smaller than one

year. For example, configure the daylight saving time to start on the first Monday in
August at 06:00:00 a.m., and end on the last Sunday in September at 06:00:00

a.m.

Figure 44 Setting the daylight saving time

Configuring the system time at the CLI

Configuration guidelines

You can change the system time by configuring the relative time, time zone, and daylight saving time. The

configuration result depends on their configuration order (see

Table 14

). In the first column of this table,

1 represents the clock datetime command, 2 represents the clock timezone command, and 3 represents
the clock summer-time command. To verify the system time setting, use the display clock command. This

table assumes that the original system time is 2005/1/1 1:00:00.

Table 14 System time configuration results

Command Effective

system time

Configuration example System time

1

date-time

clock datetime 1:00
2007/1/1

01:00:00 UTC Mon
01/01/2007.

2

Original system time ±
zone-offset

clock timezone
zone-time add 1

02:00:00 zone-time Sat
01/01/2005.

1, 2

date-time ± zone-offset

clock datetime 2:00
2007/2/2

clock timezone
zone-time add 1

03:00:00 zone-time Fri
02/02/2007.

2, 1

date-time

clock timezone
zone-time add 1

clock datetime 3:00
2007/3/3

03:00:00 zone-time Sat
03/03/2007.

Advertising
This manual is related to the following products: