Scheduling a job in the modular approach, Scheduled job configuration example, Network requirements – H3C Technologies H3C SecBlade LB Cards User Manual
Page 81: Scheduling a job in the modular, Approach
71
Scheduling a job in the modular approach
To configure a scheduled job:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a job and
enter job view.
job job-name N/A
3.
Specify the view in
which the commands
in the job run.
view view-name
You can specify only one view for
a job. The job executes all
commands in the specified view.
4.
Add commands to
the job.
•
Configure a command to run at a
specific time and date:
time time-id at time date command
command
•
Configure a command to run at a
specific time:
time time-id { one-off | repeating } at
time [ month-date month-day |
week-day week-daylist ] command
command
•
Configure a command to run after a
delay:
time time-id { one-off | repeating } delay
time command command
Use any of the commands.
Changing a clock setting does not
affect the schedule set by using the
time at or time delay command.
Scheduled job configuration example
Network requirements
Configure scheduled jobs on the LB product to enable interfaces GigabitEthernet 0/1, GigabitEthernet
0/2, and GigabitEthernet 0/3 at 8:00 and disabled them at 18:00 on working days every week, to
control the access of the PCs connected to these interfaces.
Figure 47 Network diagram