Active state, Running state – H3C Technologies H3C SecBlade LB Cards User Manual
Page 156
146
Figure 94 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE after system reboot. For the
seven patches in
, if you activate the first five patches, their states change from DEACTIVE to
ACTIVE. The patch states in the system are as shown in
The patches that are in ACTIVE state change to the DEACTIVE state after a system reboot.
Figure 95 Patches are activated
RUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example, if you
confirm the first three patches in
, their state changes from ACTIVE to RUNNING, and the
RUNNING state persists after a reboot. The patch states of the system are shown in