H3C Technologies H3C SecBlade LB Cards - Manual (Page 171)

161
• Only one administrator can save the configuration at a moment. If one administrator saves the
configuration while the system is saving the configuration as required by another administrator, the
system prompts the second administrator to try later.
Procedures
This module supports saving the configuration in either of the following two modes: fast or common.
To save the configuration in fast mode, click the Save button at the upper right of the auxiliary area.
Figure 100 Saving the configuration
To save the configuration in common mode:
1. Select System > Maintenance from the navigation tree.
The Save page appears, as shown in
Figure 100 .
2. To encrypt the configuration file, select Encrypt the configuration file.
3. Click Apply.
Backing up the next-startup configuration file
Configuration file backup allows administrators to:
• View the next-startup configuration file (including .cfg and .xml files).
• Back up the next-startup configuration file (including .cfg and .xml files) to the PC of the current user.
IMPORTANT:
H3C recommends backing up both the .cfg and .xml configuration files. If you back up only the .cfg
configuration file, some configuration information might not be restored when, for example, the
configuration is mistakenly removed.
To back up the next-startup configuration file:
1. Select System > Maintenance from the navigation tree.
2. Click the Backup tab.