H3C Technologies H3C SecBlade LB Cards - Manual (Page 155)

145
Figure 92 Impact of patch manipulation commands on patch state
IDLE state
Patches that have not been loaded are in IDLE state. You cannot install or run these patches. As shown
in
Figure 93 , the patch memory area can load up to eight patches.
The patch memory area supports up to 200 patches.
Figure 93 Patches that are not loaded to the patch memory area
DEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
Suppose that the patch file you are loading has seven patches. After the seven patches successfully pass
the version check and CRC check, they are loaded to the patch memory area and are in DEACTIVE state.
In the patch memory area, patch states are as shown in Figure 94 .