H3C Technologies H3C SecBlade LB Cards - Manual (Page 117)

107
Configuration procedure
1. Configure the S7500E:
# Configure the unified management VLAN.
<S7500E> system-view
[S7500E] unified-management vlan 3000
# Enable ACSEI server.
[S7500E] acsei server enable
# Configure the local user to log in to the Web interface.
[S7500E] local-user admin
[S7500E-luser-admin] password simple admin
[S7500E-luser-admin] authorization-attribute level 3
[S7500E-luser-admin] service-type web
2. Configure the LB module:
# Configure the unified management VLAN.
<LB> system-view
[LB] unified-management vlan 3000
# Enable ACSEI client.
[LB] interface ten-gigabitethernet 0/0
[LB-Ten-GigabitEthernet0/0] acsei-client enable
[LB-Ten-GigabitEthernet0/0] quit
# Configure the local user to log in to the Web interface.
[LB] local-user admin
[LB-luser-admin] password simple admin
[LB-luser-admin] authorization-attribute level 3
[LB-luser-admin] service-type web
Verifying the configuration
1. Log in to the switch's Web interface by using the username and password admin.
Figure 72 Login page
2. Select Device Info from the navigation tree.
3. Click the Device Management tab.
4. Click the manage link for the LB module.
The Web interface of the LB module appears.