H3C Technologies H3C SecBlade LB Cards - Manual (Page 187)

177
Step Command Remarks
3. Display hotkeys.
display hotkey [ | { begin |
exclude | include }
regular-expression ]
Optional.
Available in any view. See
Table
25 for hotkeys reserved by the
system.
The hotkeys in Table 25 are defined by the device. If a hotkey is also defined by the terminal software that
you are using to interact with the device, the definition of the terminal software takes effect.
Table 25 System-reserved hotkeys
Hotkey Function
Ctrl+A Moves the cursor to the beginning of a line.
Ctrl+B Moves the cursor one character to the left.
Ctrl+C Stops the current command.
Ctrl+D Deletes the character at the cursor.
Ctrl+E Moves the cursor to the end of a line.
Ctrl+F Moves the cursor one character to the right.
Ctrl+H Deletes the character to the left of the cursor.
Ctrl+K Aborts the connection request.
Ctrl+N Displays the next command in the command history buffer.
Ctrl+P Displays the previous command in the command history buffer.
Ctrl+R Redisplays the current line.
Ctrl+V Pastes text from the clipboard.
Ctrl+W Deletes the word to the left of the cursor.
Ctrl+X Deletes all characters to the left of the cursor.
Ctrl+Y Deletes all characters to the right of the cursor.
Ctrl+Z Returns to user view.
Ctrl+] Terminates an incoming connection or a redirect connection.
Esc+B Moves the cursor back one word.
Esc+D Deletes all characters from the cursor to the end of the word.
Esc+F Moves the cursor forward one word.
Esc+N Moves the cursor down one line. This hotkey is available before you press Enter.
Esc+P Moves the cursor up one line. This hotkey is available before you press Enter.
Esc+< Moves the cursor to the beginning of the clipboard.
Esc+> Moves the cursor to the ending of the clipboard.