Network requirements, Configuration procedure – H3C Technologies H3C SecBlade LB Cards User Manual
Page 94
84
Item Description
Virtual Device
Set the virtual device to which a user belongs.
Every time a user logs in through the Web interface, the user logs in to the virtual
device to which the user belongs. When a root virtual device user with privilege
level Configure or Management logs in to the device, the user can log in to
another virtual device by selecting System > Device > Virtual Device > Virtual
Device. The access right of the user is the same as other virtual device users that
have the same privilege level.
Local user configuration example for the Web interface
Network requirements
As shown in
, configure LB to allow user Emily to log in to the LB (root virtual device) through the
Web interface and view the data on the LB, but prevent the user from performing any configurations.
Figure 50 Network diagram
Configuration procedure
1.
Configure the IP address of the interface. (Details not shown.)
2.
Configure local user Emily:
a.
Select System > User from the navigation tree.
The Local User tab appears.
b.
Click Add.