H3C Technologies H3C Intelligent Management Center - Manual (Page 12)

7
Solution 2
1. Identify whether all the required software packages are installed in the operating system by using
the following commands:
{
rpm –qa—Checks all installed software.
{
rpm –q—Checks a specific rpm file.
The required software packages are:
{
libgomp-4.4.7-3.el6
{
kernel-headers-2.6.32-358.el6
{
glibc-headers-2.12-1.107.el6
{
glibc-devel-2.12-1.107.el6
{
gcc-4.4.7-3.el6
{
kernel-devel-2.6.32-358.el6
2. If any software package is not installed, insert the operating system installation disk into the
CD-ROM driver, copy the software package from the server working folder to your local server,
and use the rpm -ihv xxx.rpm command to install the package.
3. Install the IMC probe.