H3C Technologies H3C Intelligent Management Center - Manual (Page 77)

Adding VPN 1
Use the auto-discovery function to add VPN 1 that has been deployed. After VPN 1 is discovered, create
virtual CEs (VCEs) to represent the physical CEs.
Before you add VPN 1 to MPLS VPN Management, make sure BGP, MPLS, and SNMP have been
configured on the devices, and the P devices and PEs have been added to IMC.
Creating AS 100
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click Add on top of the List area.
The Add AS dialog box appears.
4. Enter AS 100 in the AS Name field and enter 100 in the AS Number field.
5. Click OK.
Importing PEs and P devices
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click the AS 100 link.
The Sub-region/PE Device List page appears.
4. Click Import PE on top of the Sub-region/PE Device List area.
The Import Device page appears.
5. Enable Filter devices according to AS number.
6. Click Select, and select PE 1, PE 2, and PE 3.
7. Click OK to return to the Sub-region/PE Device List page.
8. Click Import P on top of the Sub-region/PE Device List area.
The Import Device page appears.
9. Click Select and select the four P devices.
10. Click OK to return to the Sub-region/PE Device List page.
Discovering VPN 1 automatically
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Auto Discovery.
67