Grass Valley AMX-1881 - Manual (Page 15)

AMX-1881 HD/SD 8 AES Embedder
Guide to Installation and Operation
AMX-1881 Page 15 of 19
ANNEX 2 – Alarm Configuration
Click on the Alarm Config button on the left-hand
side of the iControl panel to open this panel in new
window.
This panel allows the alarm reporting of the AMX-
1881 to be configured.
The panel is organized in columns.
Status/Name
This contains an expandable tree listing all the
alarms reported by this AMX-1881 card.
• Each alarm name includes an icon that shows
its current status
• Some alarms may be text-only and the alarm
status is shown in the name and not by a status
icon,
e.g.
The Overall alarm and GSM contribution columns
contain pulldown lists that allow the level of
contribution of each individual alarm to the alarm
named in the column heading to be set.
Levels associated with these alarms
The pulldown lists may contain some or all of the following options:
The alarm makes no contribution (black)
The alarm is of minor importance (yellow)
The alarm is of major importance (orange)
The alarm is of critical importance (red)
The alarm exists but has no effect (used for text and composite alarms)
Shortcut: if you click Set All in one of the columns beside a major heading in the Status/Name column, you will open a
pulldown that lets you assign a level to all alarms in that section of the column simultaneously.
• Overall Alarm
This column allows configuration of the contribution of each individual alarm to the Overall Alarm associated with this card.
The Overall Alarm is shown in the upper left corner of the iControl panel, and also appears at the bottom of the Status/Name
column.