Grass Valley AMX-1881 - Manual (Page 18)

AMX-1881 HD/SD 8 AES Embedder
Guide to Installation and Operation
Page 18 of 19 AMX-1881
Restore profile from disk…
Click this button to open an Open dialog box within which you can
locate and select a valid AMX-1881 profile file.
•
Click Open to read the contents of the file and to reconfigure
this AMX-1881’s profiles according to its contents
•
While the reconfiguration is in progress, the Transfer Status
box on the right of the Copy profile from line will indicate
Working against a yellow background
•
When the reconfiguration is complete, the Transfer Status
box on the right of the Copy profile from line will indicate
Succeeded against a green background
Note: There is no need to select a profile using the Profile
pulldown (e.g. current, User1, etc.) when restoring a profile from
disk, because the profile selection is stored within the file.
Copy profile to section
This line shows other AMX-1881 cards that are available on the iControl network, each identified by App server, Densité frame
and slot number, card type and firmware version.
The Profile column shows the same information as is shown for the current card in the Copy profile from line, i.e.
•
Current, User1, User2, User3, User4, User5
The Select column includes a checkbox to identify which AMX-1881 cards you wish to copy profiles into from the current card.
•
For convenience, a Select all checkbox is provided in the column header
•
Source and destination cards must have the same firmware version for the copy profile to work
Click Copy to copy the selected profiles from this card into the selected other AMX-1881 cards
•
While the profile copy operation is in progress, the Transfer Status box on the right of the Copy profile to line will indicate
Working against a yellow background
•
When the profile copy operation is complete, the Transfer Status box on the right of the Copy profile to line will indicate
Succeeded against a green background