Grass Valley DD10 part 1 - Manual (Page 122)

3. Menu control Diamond digital DD10
116
Cursor control
For system configuration, setups, etc., some menus include cursor functions.
The cursor can be moved in the entry fields with the arrow keys.
BLANK Insertion of blanks in text
RUBOUT Deletion of character left of cursor
Autorepeat function:
If the corresponding key is held down, the functions are executed continuously.
Leaving the menu
In all menus the EXIT softkey is used to leave the menu.
EXIT
If you press the associated function key, the system returns to the higher order
menu.
3.1.2 OPERATIONAL AID BY RUNNING LIGHT IN KEYS
In various operational sequences you may have to select a second option after you
have selected a function. To facilitate the operation, the relevant keys in the respec-
tive mode are highlighted with a running light or by conection of all lamps of the key-
bloc (e.g. wipe pattern keypad for the entry of text).
Thus you can easily see which options are available to produce the desired effect.
If you press one of this keys, the light will go out.
To facilitate the operation, the software of the switcher contains a number of warn-
ings which, for instance, point to internal switcher lockings in case of an illogical
operational step. These warnings are self-explanatory and are faded in in the menu
field of the switcher.
Normally the operational step and the warning can be cancelled without changing
the current setting with the CANCEL softkey or by pressing any key. Some warn-
ings also permit the use of further softkeys, which are appropriately labelled, in
order to cancel the locking and thus select the desired function at the expense of
another function.