Grass Valley iControlEdge v.1.20 Installation - Manual (Page 57)

Configuring Allégro Streaming Relays
53
10. Repeat step 4 to step 9 for each Allégro in your configuration.
Next, you must configure each Allégro so that it streams to the Application Server.
11. In your Web browser’s address bar, type the Allégro’s IP address and specify port 8080 (e.g.
http://10.44.34.25:8080 ).
12. Under Streaming Encoder, click Configuration:
13. On the Streaming Encoder Configuration page, click Network:
Click here
Click here