Grass Valley K2 AppCenter v.7.2 - Manual (Page 68)

68
K2 AppCenter User Manual 05 April 2010
Chapter 5 Playing and editing clips
2. Open the Load Clip dialog using one of the following:
• Click t he
Load
button in Player.
• Select
Control | Load
.
3. If needed, use the
Look in
drop-down list to browse to the desired bin.
4. Select a clip in the Load Clip dialog, then click
OK
.
The clip is loaded in the player.
Related topics:
• “Playing a clip” on page 68
• “Using cue points for playback” on page 70
Playing a clip
Once a clip is loaded in the Player application, you can play the clip or search for a
specific frame of video using the transport controls. Use the links in the following
table to find information on playing clips.
Scheduling a clip to play
This feature is part of the licensable AppCenter Pro option.
You can schedule a clip to start playing at a specified time. Scheduled Start Time uses
Time of Day driven by the system clock or LTC, but not VITC. To schedule a start
time for a clip to record, see “Scheduling a recording” on page 52 .
1. Select
Control | Schedule Start Time
. Trigger At entry box appears.
Enter the time when you want the recording to start and click
OK
. The time of day,
trigger time, and a countdown are displayed.
Selecting loop play
Loop play allows the clip to play in a continuous loop until
Stop
is pressed. The Time
Dome is used to enable/disable loop play.
• Click t he
Time Dome
, then choose
Loop Mode
in the pop-up menu.
If you are using… Refer to…
On-screen transport controls “Using on-screen transport controls” on page 39
Keyboard shortcuts Appendix A, Keyboard Shortcuts
GPI triggers “GPI and other configurations” on page 165