Discover and assign devices, Discovering devices with siteconfig – Grass Valley SiteConfig Migration Instructions User Manual
Page 46
Discover and assign devices
NOTE: There might be a newer version of this document available. Check your
product's release notes and the Grass Valley website at www.grassvalley.com/docs
for references to an updated version that contains additional important information.
Use the topics in this section as appropriate for your system to establish communication
between SiteConfig and your devices.
NOTE: Refer to the migration checklist for your system type to determine the
appropriate topics and other system-specific information.
Related Links
on page 11
Discovering devices with SiteConfig
Prerequisites for this task are as follows:
•
The Ethernet switch or switches that the support the control network are configured
and operational. If multiple switches, ISLs are connected and trunks configured.
•
The control point PC is communicating on the control network.
•
There are no routers between the control point PC and the devices to be discovered.
•
Devices to be discovered are Windows operating system devices, with SiteConfig
support installed.
•
Devices are cabled for control network connections.
1. Open SiteConfig on the control point PC.
2. In the toolbar, click the discover devices button.
The Discover Devices dialog box opens.
46
SiteConfig Migration Instructions
02 July 2009
Discover and assign devices