Rear panel indicators, Codec board indicator, Codec board indicator codes – Grass Valley K2 Solo 3G Client Service Manual v.9.0 User Manual
Page 34: Lan connector indicator codes
Priority
Status Condition
LED behavior
3
Normal drive activity — The drive is healthy and
no disk access is currently underway.
Green ON solid
—
No drive — Drive is not present or is not fully
engaged in slot.
Off
Rear panel indicators
The following indicators are visible from the rear panel view.
Codec board indicator
Each channel has a green/red LED that indicates the status of the Real Time Processor (RTP).
RTP
RTP
Codec board indicator codes
Interpret the RTP LED as follows:
Status condition
LED behavior
RTP is up and connected to the host
Green flashing at
approximately 1 second
intervals
RTP is not connected to the host.
Green flashing at greater than
1 second intervals
RTP error condition. Real Time OS is not running.
Red
Real Time OS is not running.
Off
LAN connector indicator codes
The motherboard has four RJ-45 LAN connectors that include integrated status LEDs. The LEDs
are oriented as follows:
Green/Yellow/Orange
Green
34
K2 Solo 3G Service Manual
06 November 2012
Product description