Grass Valley Kameleon Series v.5.1.0 User Manual
Page 10
10
Kameleon Series Instruction Manual
Introduction
Standard front processing module functions include:
•
3D video decoding (KAM-AV only),
•
Up to 8 channels of audio A/D or D/A conversion (with submod-
ules),
•
Video and audio synchronization,
•
8 channels of audio embedding/de-embedding,
•
Audio remapping to specific I/O,
•
AES/EBU sample rate conversion,
•
Video and audio processing amplifiers,
•
Video and audio test signal generators,
•
Individual Analog and Digital video timing controls, and
•
Powerful VBI (vertical blanking interval) processing.
•
Six types of rear I/O modules are available:
•
KAM-AA-R Analog Audio Rear module,
•
KAM-MIX-R Mixed Audio Rear module,
•
KAM-AES-R AES Audio Rear module,
•
KAM-AA-AES-UR Rear module,
•
KAM-AA-MIX-BR Rear module, and
•
KAM-AA-MIX-UR Rear module.
•
Two audio conversion submodules that can be installed on the pro-
cessing module,
•
Four-channel Analog to Digital Conversion Submodule (ADC), and
•
Four-channel Digital to Analog Conversion Submodule (DAC).
Note
Frame synchronization requires a 2000GEN Genlock Reference Module
installed in the 2000 Series Kameleon Frame.
A front and rear module pair are required. The front processing modules
provide the signal processing power while the rear module determines the
specific I/O connections (refer to
). Separate audio
A-to-D and D-to-A converter submodules may be installed in two slots on
either version of the processing module.