Kameleon series multi-function modules, Introduction, Kameleon series – Grass Valley Kameleon Series v.5.1.0 User Manual
Page 9: Multi-function modules
Kameleon Series Instruction Manual
9
Kameleon Series
Multi-function Modules
Introduction
This manual contains a Quickstart guide supported by references to the
complete manual and supporting documents (see
). Detailed installation, power up, and configuration information
follows the Quickstart Guide.
The Kameleon Series multi-function modules are for use in 2000 Series
Kameleon Frames. They are designed for facilities that receive multiple
feeds that need considerable audio and video processing. They are partic-
ularly well suited for broadcasters and cable facilities that need to manipu-
late or add audio channels to multiple program streams.
Note
Kameleon operation requires 2000NET Network Interface Module hardware
revision 01A1 or greater with software version 4.0.0 or greater.
Kameleon systems installed in the 2000T3N frame require the 2000FAN fan
sled (refer to
Kameleon offers processing modules that provide a flexible, compact
system of conversion, multiplexing, timing and signal processing functions
for standard definition, analog and digital, video and audio.
The Kameleon Modular Series consists of the following:
•
Two versions of the front processing module are available,
•
SD – SDI video processor with SDI Video I/O and AES/EBU
and/or analog audio I/O (with submodules), and
•
AV – Composite or SDI video I/O and AES/EBU or analog audio
I/O (with submodules).