Grass Valley Kameleon Series v.5.1.0 - Manual (Page 120)

120 Kameleon Series Instruction Manual
Software Updating
12. Check the Re-Boot when complete checkbox in the lower left corner of the
screen.
13. Click on the Load button at the bottom of the Load Software screen to
begin the update.
14. If the load has been successful, a popup will appear as shown in
Figure 78 . Click the OK button.
Figure 78. Load Successful Popup
15. Allow the reboot to complete.
16. Open the Status web page of the module ( Figure 21 on page 47 for
KAM-AV and Figure 22 on page 48 for KAM-SD). Check that the
software version has been updated.
17. Go to the E-MEM web page and select the Recall button to restore
factory settings. Verify proper operation of the module.
18. This completes the update. Refer to the latest Kameleon Release Notes
in PDF format for an overview on new functionality for this software
release.