Grass Valley Kayenne XL Package Installation v.7.0.2 User Manual
Page 129
Advertising
Kayenne XL Package — Installation and Service Manual
129
Control Panel Unit (PCU) Bios Settings
•
Set Serial Port 1 Configuration to 2F8/IRQ04
•
Set Serial Port 2 Configuration to 2F8/IRQ03
•
Select the Advanced menu select USB Configuration
•
Set USB Mouse Legacy Support to Enabled.
•
Select the Boot menu and set
•
1st Boot Device to Primary Master
•
2nd Boot Device to Secondary Master
•
3rd Boot Device to USB Harddisk
•
Quiet Boot to Enabled
•
Halt On Errors to Disabled
•
Press the F10 key and then press Enter to select Yes and save the new
CMOS settings.
Advertising