Grass Valley Kayenne XL Package Installation v.7.0.2 User Manual
Page 131
Advertising
Kayenne XL Package — Installation and Service Manual
131
Mainframe BIOS Settings
•
Select PCI/PNP Configuration and press Enter
•
Set PNP OS Installed to No. Press ESC to return to the Advanced
menu.
•
In the Advanced menu select I/O Device Configuration and press Enter.
•
Set Legacy USB Support to Disabled.
•
Set Serial Port A to Enabled.
•
Set Serial Port B to Enabled. Press ESC to return to the Advanced menu.
•
Select the Power menu at the top of the screen.
•
Set Enable ACPI to No.
•
Select the Boot menu at the top of the screen.
•
Select Sandisk (or Removable Devices) and make sure it is the first
priority in the Boot menu.
•
Press the F10 Key and then press Enter to select Yes and save the new
BIOS settings.
Advertising