Grass Valley Kayenne XL Package Installation v.7.0.2 - Manual (Page 48)

48 Kayenne XL Package — Installation and Service Manual
Section 3 — Control Surfaces
Control Panel Mounting Points
For fastening the control panel in place, please use the six brackets as
shown in
Figure 25 on page 48 . Depending on the material of the availabe
desk the control panel can be fastened with sheet metal screws 3.9 mm or
crosshead screws 4 mm
Figure 25. Mounting Detail 4-ME Control Panel
Cutout
504.5 mm
Small (25) panel type
696.5 mm
Wide (35) panel type
720 mm
42.5 mm
60 50
5
5
Am4 DIN 74