Polaris 2013 ATV Sportsman 500 Tractor INTL - Manual (Page 109)

107
MAINTENANCE
Vehicle Immersion
4. Turn the ignition key past the
PARKING LIGHTS position to
engage the starter. Engage the
starter for only 2-3 seconds.
5. Dry the spark plug. Reinstall the
plug or install a new plug.
6. Torque to specification. See page
104.
7. Attempt to start the engine. If
necessary, repeat the drying
procedure.
8. Have the vehicle serviced by
your dealer promptly, whether
you succeed in starting it or not.
9. If water has been ingested into the PVT, follow the procedure on
page 111 for drying out the PVT.